Sony HVR-Z5C Service Manual page 260

Apply grease (1)
Motor holder
Screw
(M1.2 × 1.5)
Worm shaft (2J)
Motor holder base
Apply grease when installing
Amount of grease: A ball of
grease of 1.0 mm diameter
Side of outside
Cam gear ass'y
Side of inside
Do not apply grease to the
locations other than those specified .
Make sure to follow the amount of
grease to be applied.
HVR-Z5C/Z5E/Z5J/Z5N/Z5P/Z5U
Application of grease, soldering method and precautions, and phase
matching adjustment are compiled and below.
Motor ass'y
(loading) (M902)
Screw
(M1.4 × 1.4)
Cam gear ass'y
HELP
Motor holder (bottom)
Side of motor worm
Amount of grease application
: Grease of a ball of 1.0 mm
diameter (2 locations)
Relay gear
Belt
Relay gear
shaft
Conversion
gear shaft
Apply grease when installing
Amount of grease: A ball of
grease of 1.0 mm diameter
Washer
Conversion gear
Apply grease
Conversion
gear shaft
HELP