Juniper EX9200 Features Manual page 178

Port Mirroring Feature Guide for EX9200 Switches
162
NOTE: On T4000 routers, when you include the
statement at the
the system, only the T4000 Type 5 FPCs present on the router become
online while the remaining FPCs are offline, and FPC misconfiguration
alarms are generated. The
FPC misconfiguration (
generation the alarms.
The following sample output shows the FPC status after the
enhanced-mode
Type 5 FPC present in slot 5 becomes online while the remaining FPCs
are offline.
user@host> show chassis fpc
Utilization (%)
Slot State
Buffer
0 offline
1 offline
2 offline
3 Empty
4 Empty
5 Online
27
The following sample output shows FPC misconfiguration alarms:
user@host> show chassis alarms
3 alarms currently active
Alarm time
2011-03-24 00:52:51 PST
2011-03-24 00:52:31 PST
2011-03-24 00:52:31 PST
—(Optional) Display detailed status information for all FPCs or for the FPC in the
detail
specified slot (see
fpc-slot
all-members —(MX Series routers and EX Series switches only) (Optional) Display status
information for all FPCs on all members of the Virtual Chassis configuration.
—(QFabric systems only) (Optional) Display status information
interconnect-device name
for all FPCs on the Interconnect device.
—(Optional) FPC slot number:
fpc-slot
(TX Matrix and TX Matrix Plus routers only)—On a TX Matrix router, if you specify
the number of the T640 router (line-card chassis) by using the
(the recommended method), replace
Otherwise, replace
fpc-slot
Plus router, if you specify the number of the specified router (line-card chassis)
by using the
lcc number
[edit chassis network-services]
show chassis alarm
FPC fpc-slot misconfig
statement is configured on the T4000 router. The T4000
Temp CPU Utilization (%)
(C) Total Interrupt
---FPC misconfiguration---
---FPC misconfiguration---
---FPC misconfiguration---
66 50
Class Description
Major FPC 1 misconfig
Major FPC 2 misconfig
Major FPC 3 misconfig
or ).
slot
fpc-slot with a value from
with a value from through
0
option (the recommended method), replace
Copyright © 2016, Juniper Networks, Inc.
enhanced-mode
hierarchy level and reboot
command output displays
) as the reason for the
Memory
DRAM (MB) Heap
0 2816 29
option
lcc number
0 through 7 .
. Likewise, on a TX Matrix
31
with
fpc-slot