Rate (Forwarding Options) - Juniper EX9200 Features Manual

rate (Forwarding Options)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
rate number;
[edit forwarding-options analyzer analyzer-name input],
[edit forwarding-options port-mirroring family (inet | inet6) input],
[edit forwarding-options port-mirroring input],
[edit forwarding-options sampling input],
[edit forwarding-options sampling instance instance-name input]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
routers.
Support at the
[edit forwarding-options analyzer analyzer-name input]
MX Series routers introduced in Junos OS Release 14.1.
Set the ratio of the number of packets to be sampled. For example, if you specify a rate
of 10, every tenth packet (1 packet out of 10) is sampled.
Native analyzer sessions (that is, the
input] hierarchy level for MX Series routers) can be configured without specifying input
parameters, which means that the instance uses default input values: rate = 1 and
maximum-packet-length = 0.
number —Denominator of the ratio.
Range: 1 through 65,535
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Port Mirroring
Configuring Traffic Sampling
Chapter 12: Configuration Statements
[edit forwarding-options analyzer analyzer-name
hierarchy level for
111