Advertisement
5. Operation List
The process for the operator functions are shown below.
•
The operation keys are expressed as follows.
: ESC key
: "-" key
ESC
-
Time display screen (when the power is turned on)
RUN
<Setting the time>
Program error
Keyword error
(Entry code error)
( E r r o r d i s p l a y )
Refer to error display.
<Monitoring a bit device (X/Y/M/S)>
RUN
1
Y
➀
➀
From the displayed device No., the ON/OFF
status of 8 points (in the case of X or Y) or 10
points (in the case of M or S) is indicated.
: OFF status
➁
Eight points (in the case of X or Y) or 10 points
(in the case of M or S) are scrolled at a time.
"+" key: Scrolls toward larger device Nos.
" - " key: Scrolls toward smaller device Nos.
<BFM unit selection>
S: State
+
-
BFM
1
➀
+
-
BFM
+
-
T: Timer
Guidelines for the safety of the user and protection of the Micro Display Module FX
•
This manual has been written to be used by trained and competent personnel. This is defined by the European directives for machinery, low voltage and EMC.
•
If in doubt at any stage during the installation of the Micro Display Module FX
local and national standards. If in doubt about the operation or use of the Micro Display Module FX
•
Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage that may arise as a result of the installation or use of this equipment.
•
All examples and diagrams shown in this manual are intended only as an aid to understanding the text, not to guarantee operation. Mitsubishi Electric will accept no
responsibility for actual use of the product based on these illustrative examples.
•
Owing to the very great variety in possible application of this equipment, you must satisfy yourself as to its suitability for your specific application.
: "+" key
+
OK
➁
OK
+
Press and hold
+1
Determine
it for 2 seconds
the input.
-
➀
or more.
-1
<Selecting a device>
OK
TCD
XYMS
➂
Select an either device using the "+" and "-" keys.
(In the initial status, "D" flickers.)
T, C, D (16-bit), D (32-bit), X, Y, M, S or BFM
"-" key
* "BFM" is displayed only when the FX
<Forced setting/resetting a bit device (Y/M/S)>
+
OK
➂
-
➁
➂
Forced set/reset mode
A selected device is indicated with underline.
: ON status
<Buffer memory No. selection>
BFM
OK
➁
➂
➀
If a special block is connected to the FX1N Series when you select a device, a buffer memory (hereafter referred to as "BFM") is
displayed. A displayed numeric value indicates the unit No.
➁
When you press the OK key, BFM monitor starts for the unit having the displayed unit No.
➂
The BFM No. is displayed.
➅
After pressing the OK key, you can change the value of the displayed BFM No. Every time you press and hold the OK key for 2
seconds or more, the display changes over alternately between 16-bit BFM and 32-bit BFM.
➆
Increase or decrease the BFM current value using the "+" or "-" key.
➇
Write the data you have input to the BFM.
CAUTION
Depending on the type of the connected special block, the BFM is cleared when the power is turned off or the mode is changed
over between RUN and STOP. When using a special unit, write the data finally to the BFM using a sequence program (using FNC
79 TO instruction (write to BFM).)
: OK key
➀
An item being changed flickers.
OK
➁
Set "year, month, day, hour and minute" in this order.
When the OK key is pressed at "minute" set up, the setting operation will be completed.
➁
➂
+
OK
Determine
the input.
-
"+" key
Series PLC is used.
1N
RUN
Y
➂
Underline flickers.
<Buffer memory change>
+
-
➄
➃
➃
The BFM current value is displayed.
1N
-5DM always consult a professional electrical engineer who is qualified and trained to the
1N
1N
To
1
+
OK
Set or reset the bit
device.
-
➄
➃
➃
Select a device No.
➄
The current ON/OFF status is reversed.
*
The device turns on and off alternately when the OK key is
pressed.
If the OK key is pressed while the device is ON, it turns off.
If the OK key is pressed while the device is OFF, it turns on.
OK
+
OK
OK
-
➆
Press and hold
for 2 sec or more.
➅
➄
Select the BFM No.
-5DM
-5DM please consult the nearest Mitsubishi Electric distributor.
OK
➇
Advertisement
