Table of Contents
Advertisement
Attaching LCD Options
You can attach mounting accessories to the LCD display in one of
the following two ways:
1. In the upright position
2. Lay the screen face down
To avoid damaging the screen face, place the protective sheet on the
table to lay the LCD on. The protective sheet was wrapped around
the LCD in the original packaging.
This device cannot be used or installed without the Tabletop Stand or
other mounting accessory. For proper installation it is strongly rec-
ommended to use a trained, JVC authorized service person. Failure
to follow JVC standard mounting procedures could result in dam-
age to the equipment or injury to the user or installer. Product war-
ranty does not cover damage caused by improper installation. Fail-
ure to follow these recommendations could result in voiding your
warranty.
When using mounting accessories, they must be compatible with
VESA
®
Flat Display Mounting Interface Standard FOR 23" TO 30.9"
DIAGONAL Flat Displays (Hole Pattern 200 mm x 100 mm). JVC
strongly recommends using screws M4 size and 8mm in length. If
using screws longer than 8mm, check the depth of the hole. (Rec-
ommended Fastern Force: 150 - 170N•cm)
JVC recommends using mounting interface that comply with UL1678
standard in North America.
When using the mounting accesories, screw the mouting
accessories in the rear of the display.
Hole Pattern:
200 mm x 100 mm (by using 6 screws)
Screw holes (for using 6 screws)
Table
Caution:
• This unit does not stand stable without the tabletop stands.
• When display is installed in the portrait position, left edge should
Ventilation Requirements for enclosure
mounting
To allow heat to disperse, leave space between surrounding
objects as shown in the diagram to the right.
*Ambient temperature should be less than 40 deg C
To avoid falling down
Fasten the LCD display to a wall using a cord or chain which is
sufficient to support the weight of the LCD display (approx. 16kg).
Before moving the LCD display, the cord or chain should be re-
Tabletop Stand
moved.
English-4
Use the mounting accesories (not supplied) to install it without the
tabletop stands.
For details, refer to the instruction manual of the mounting
accesories.
be upper from front view.
*
Advertisement
Table of Contents
