About Remote-Pip Mode - JVC GD-30L1G Instructions Manual

OSD Controls
* Note (1) SCREEN SAVER
With this feature, the image displayed moves at incremental rate every 10 minutes and is not noticed by the end user. Please
be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when a
residual or "ghost" image of a previous image remains visible on the screen. Unlike CRT displays, LCD displays' image
persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate
image persistence, turn off the display for as long as the previous image was displayed. For example, if an image was on the
display for one hour and residual image remains, the display should be turned off for one hour to erase the image.
As with all personal display devices, JVC recommends displaying moving images and using a moving screen saver at regular
intervals whenever the screen is idle or turning off the display when not in use.
Remote PIP is a different function from normal PIP that can display PIP on particular color window on the desktop of PC and change
the size, position with the mouse.
Set your PC as follows:
(1) Open a new window (e.g. in Microsoft
The size of the picture box should be set to, 256 dot x 144 line, which is 12.864 cm (W) x 7.236 cm (H) or 512 dot x 384
line, which is 25.728 cm (W) x 19.296 cm (H)
(2) Set the window's color to dark red (R=128, G=0, B=0).
There should not be any text, line, pattern, etc in the window.
Set your display as follows:
(3) Select "PICTURE IN PICTURE" on OSD.
(4) Select "PIP SIZE" on OSD.
(5) Select "REMOTE-PIP" on OSD.
(6) Turn on PIP button on Remote Control.
(7) Sub picture is displayed in the new window on the PC.
(8) The size and position of the Sub Picture can be changed with the mouse.
Note: When REMOTE-PIP is selected, contrast and brightness of the display may change. REMOTE-PIP may not be displayed on
following cases:
• Gamma curve on PC's display setting is changed.
• Contrast or brightness setting is changed from reset position on OSD.
In these cases, Please change the setting to reset position.
– AV Input continued

About REMOTE-PIP Mode

Office Excel) and create a picture box.
®
English-27