Table of Contents
Advertisement
Quick Links
PLASMA DISPLAY MONITOR
GD-V500PZU
For customer Use:
Enter below the Model No. and the Serial
No. which is located on the rear panel of the
cabinet. Retain this information for future
reference.
Model No.
Serial No.
POWER
/
R - STANDBY
G POWER ON
INSTRUCTIONS
INPUT
–
VOL
+
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock do not remove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to
rain or moisture.
Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including
on shelves above, etc.)
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin
grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
2
The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
Advertisement
Table of Contents
Related Manuals for JVC GD V500PZU
Summary of Contents for JVC GD V500PZU
- Page 1 PLASMA DISPLAY MONITOR INSTRUCTIONS GD-V500PZU For customer Use: Enter below the Model No. and the Serial No. which is located on the rear panel of the cabinet. Retain this information for future reference. Model No. Serial No. POWER R - STANDBY INPUT –...
-
Page 2: Important Safety Instructions
Dear JVC Customer Welcome to the JVC family of customers. We hope that you will have many years of enjoyment from your new Plasma Display Monitor. -
Page 3: Table Of Contents
FCC CAUTION: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not expressly approved by JVC could cause harmful interference and would void the user’s authority to operate this device. CANADIAN NOTICE: This Class A digital apparatus complies with Canadian ICES-003. -
Page 4: Safety Precautions
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the Plasma Display Monitor. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. (All of the following accessories are manufactured by JVC) -
Page 5: Accessories
Accessories Accessories Supplied Operating Instruction book Remote Control Transmitter EUR646526 INPUT SURROUND PICTURE SOUND SET UP GD-V500PZU PICTURE POS. /SIZE ASPECT OFF TIMER PLASMA DISPLAY RCA/BNC Adapter Plug Optional Accessories • • Speakers Stand Unit TS-C5000SPG TS-C50P1G • • • Wall Mounting Unit Wall Mounting Unit TS-C50P6G... -
Page 6: Basic Controls
Basic Controls – INPUT R - STANDBY G POWER ON Main Power On/Off Switch Input button (VIDEO (S-VIDEO)/COMPONENT, Power Indicator The Power Indicator will light. RGB/PC Mode Selection) • Power-OFF ... Indicator not illuminated (The unit Push the “INPUT” button to select will still consume some power as long as the VIDEO(S-VIDEO)/COMPONENT or power cord is still inserted into the wall outlet.) -
Page 7: How To Connect The Speakers
How to connect the speakers When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) How to connect the AV Input Terminals Connect the signal source equipment (see pages 14 to 17). (Example) When connecting an S-VIDEO VCR (S-VIDEO VCR) Audio... -
Page 8: How To Connect The Component/Rgb Input Terminals
How to connect the COMPONENT/RGB Input Terminals Component signals (Y, P ) connection DVD Player Audio DVD (Y,P ) OUT RCA-BNC adapter plug Y, P 3 RCA video cables AUDIO 2 RCA audio cables Audio input to L/R sockets Notes: (1) Change the “COMPONENT/RGB-IN”... -
Page 9: How To Connect The Serial Terminals
How to connect the SERIAL Terminals The SERIAL terminal is used when the Plasma Display Monitor is controlled by a computer. COMPUTER SERIAL RS-232C cable D-sub 9p Notes: (1) Use the RS-232C cable to connect the computer to the Plasma Display Monitor. (2) The computers shown is for example purposes only. -
Page 10: Select The Input Signal
Power ON/OFF and Input Signal Selection Select the Input Signal INPUT Press the INPUT button to select the input video signal desired from equipment such as a VCR which has been connected to the Plasma Display Monitor. Input signals will change as follows: For COMPONENT INPUT (see page 30) R - STANDBY INPUT... -
Page 11: Selecting The On-Screen Menu Language
On-Screen Menu Display from Remote Control To SOUND adjust menu (see page 26) SOUND To SIGNAL screen for VIDEO NORMALIZE NORMAL (see page 31) AUDIO MENU STANDARD BASS SIGNAL TREBLE 3D Y/C FILTER (NTSC) BALANCE COLOR SYSTEM SURROUND AUTO (4:3) NORMALIZE ADJUST RETURN... -
Page 12: Adjusting Picture Pos./Size
Picture Explanation Mode NORMAL will display a 4:3 picture at its standard 4:3 NORMAL size. NORMAL ZOOM mode magnifies the central section of the picture. ZOOM ZOOM FULL will display the picture at its maximum size but with sight elongation. FULL FULL JUST mode will display a 4:3 picture at its maximum... -
Page 13: Sound Adjustment
Adjusting PICTURE POS./SIZE When the Position Left “ ” button is pressed When the Position Right “ ” button is pressed H-POS When the Position Left “ ” button is pressed When the Position Right “ ” button is pressed H-SIZE When the Position Left “... -
Page 14: Surround Controls
SURROUND Controls SURROUND SURROUND Button The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema. The surround setting switches on and off each time the SURROUND button is pressed. -
Page 15: Advanced Settings
PICTURE Adjustments Notes: Item Effect Adjustments (1) “COLOR” , “TINT” and “SHARPNESS” Selects the proper brightness and settings cannot be adjusted for “RGB” PICTURE density for the room. and “PC” input signal modes. Less More (2) You can change the level of each Adjusts for easier viewing of dark pictures BRIGHTNESS function (CONTRAST, BRIGHTNESS,... -
Page 16: Color System / Auto
SET UP for Input Signals COLOR SYSTEM / AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S-VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) Press to select the “COLOR SYSTEM” or “AUTO”. Press to select each functions. If the picture image becomes unstable: With the system set on Auto, under conditions of low level or noisy input signals the image may in... -
Page 17: Troubleshooting
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Picture Sound Electrical Appliances Cars/Motorcycles Fluorescent light Interface Noisy Sound Volume (Check whether the mute function has been activated on the remote control.) Normal Picture No Sound Not plugged into AC outlet... - Page 18 GD-V500PZU Accessories Supplied Remote Control Transmitter EUR646526 Batteries AA Size Optional Supplied Speakers TS-C5000SPG Stand Unit TS-C50P1G Wall Mounting Unit TS-C50P6G Wall Mounting Unit TS-C50P2G (angled) Ceiling Suspension Unit TS-C50P3G Dimensions 47.6” (1210mm) 28.5” (724 mm) 3.9” (98mm) 3.9" (98 mm) 47.6"...