Important Information; Declaration Of Conformity - JVC GD-30L1G Instructions Manual

Important Information

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY
DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore,
it should be read carefully in order to avoid any problems.
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to
60950.
FCC Information
1. Use the following specified cables with the GD-30L1G so as not to interfere with radio and television reception.
(1) Please use the supplied power cord or equivalent to ensure compliance with FCC requirements.
(2) Please use a shielded RGB signal cable* which has ferrite cores on each end of the cable to ensure compliance with FCC
requirements.
* mini D-sub 15 pin to mini D-sub 15 pin cable for RGB2 (D-SUB) and DVI-D cable for RGB1 (DVI-D). Please see pages
11–13 of this manual.
(3) Please attach the ferrite cores on the Audio Cable and S -VIDEO cable.
Please see page 10 of this manual.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not approved by JVC could void user's authority to operate the equipment.
conforms to the technical standards as specified in the FCC Rules.
WARNING
CAUTION

DECLARATION OF CONFORMITY

U.S. Responsible Party:
Address:
Tel. No.:
Type of Product:
Equipment Classification:
Model:
We hereby declare that the equipment specified above
English-1
JVC Professional Products Company
1700 Valley Road Wayne,
New Jersey 07470, U.S.A.
(973) 317-5000
Computer Monitor
Class B Peripheral
GD-30L1G
C22.2 No.
CAN/CSA