Additional printer setup
8
Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the
printer.
2
Note: When the printer software and any hardware options are installed, you may need to manually add
the options in the printer driver to make them available for print jobs. For more information, see
available options in the print driver" on page
To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until
it clicks into place, and then remove stacked trays one at a time from the top to the bottom.
Attaching cables
Connect the printer to the computer using a USB or parallel cable, or to the network using an Ethernet cable.
Make sure to match the following:
•
The USB symbol on the cable with the USB symbol on the printer
•
The appropriate parallel cable with the parallel port
•
The appropriate Ethernet cable with the Ethernet port
1
20.
18
"Adding