Lexmark M3150dn User Manual page 22

Additional printer setup
2
Select a wireless connection setup.
Use
Search for networks
Enter a network name Manually type the SSID.
Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.
3
Follow the instructions on the printer display.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
Before connecting the printer to a wireless network, make sure that:
•
The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more
information, see the documentation that came with your access point.
•
A wireless network adapter is installed in your printer and is working properly. For more information, see
the instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration Method
1
Depending on your printer model, navigate to either of the following:
•
> Settings >
Wireless >
Button Method >
•
> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup
> Wi‑Fi Protected Setup > Start Push Button Method
2
Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) Method
1
Depending on your printer model, navigate to either of the following:
•
> Settings >
Wireless >
Method >
•
> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup
> Wi‑Fi Protected Setup > Start PIN Method
2
Copy the eight‑digit WPS PIN.
3
Open a Web browser, and then type the IP address of your access point in the address field.
Notes:
•
The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
To
Show available wireless connections.
Note: This menu item shows all broadcast secured or unsecured SSIDs.
Note: Make sure to type the correct SSID.
> Networks/Ports >
> Wireless Connection Setup >
> Networks/Ports >
> Wireless Connection Setup >
> Network [x] > > Network [x] Setup >
> Wi‑Fi Protected Setup >
> Network [x] > > Network [x] Setup >
> Wi‑Fi Protected Setup >
22
>
> Start Push
>
> Start PIN