Lexmark M3150dn User Manual page 16

Additional printer setup
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic components
or connectors.
An optional memory card can be purchased separately and attached to the controller board.
1
Access the controller board.
For more information, see
2
Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so
may cause damage.
3
Align the notch (1) on the memory card with the ridge (2) on the connector.
4
Push the memory card straight into the connector and forward into the controller board wall until it clicks
into place.
5
Close the controller board access door.
"Accessing the controller board" on page
1
13.
1
2
2
16