Emergency Towing Procedure - Toyota COROLLA iM 2017 Service Manual

Emergency towing procedure

1
Take out the towing eyelet. (→P. 304)
2
Remove the eyelet cover using
a flathead screwdriver.
To prevent damage, cover the tip of
the screwdriver with a rag.
3
Insert the towing eyelet into the
hole and tighten partially by
hand.
4
Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
5
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
6
Enter the vehicle being towed and start the engine.
If the engine does not start, turn the engine switch to the "ON" position.
7
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: →P. 135
COROLLA iM_U (OM12K64U)
7-2. Steps to take in an emergency
287
7