Turning The Key From “Acc” To “Lock”; If The Engine Does Not Start; When The Steering Lock Cannot Be Released; Key Reminder Function - Toyota COROLLA iM 2017 Service Manual

■
Turning the key from "ACC" to "LOCK"
1
Shift the shift lever to P (continuously variable transmission) or N (manual
transmission). (→P. 131, 137)
2
Push in the key and turn it to the
"LOCK" position.
■

If the engine does not start

The engine immobilizer system may not have been deactivated. (→P. 66)
Contact your Toyota dealer.
■

When the steering lock cannot be released

When starting the engine, the engine
switch may seem stuck in the "LOCK"
position. To free it, turn the key while turn-
ing the steering wheel slightly left and
right.
■

Key reminder function

A buzzer sounds if the driver's door is opened while the engine switch is in
the "LOCK" or "ACC" position to remind you to remove the key.
WARNING
■
When starting the engine
Always start the engine while sitting in the driver's seat. Do not depress the
accelerator pedal while starting the engine under any circumstances.
Doing so may cause an accident resulting in death or serious injury.
■
Caution when driving
Do not turn the engine switch to the "LOCK" position while driving. If, in an
emergency, you must turn the engine off while the vehicle is moving, turn
the engine switch only to the "ACC" position to stop the engine. An accident
may result if the engine is stopped while driving. (→P. 283)
COROLLA iM_U (OM12K64U)
4-2. Driving procedures
129
4