Troubleshooting Tables - Cisco Catalyst 2960 Software Configuration Manual

Chapter 39 Troubleshooting
Beginning in privileged EXEC mode, use the show platform tcam errors command to display the
TCAM memory consistency check errors detected on the switch:
Command
show platform tcam errors
This example shows the output of the show platform tcam errors command:
DomainMember# show platform tcam errors
TCAM Memory Consistency Checker Errors
--------------------------------------
TCAM Space Values Masks
Unassigned 0
HFTM
HQATM
DomainMember#
Note
Table 39-4
Column
Values
Masks
Fixups
Retries
Failures
For more information about the show platform tcam errors privileged EXEC command, see the
command reference for this release.

Troubleshooting Tables

These tables are a condensed version of troubleshooting documents on Cisco.com.
•
•
•
OL-26520-01
Fixups Retries Failures
0 0
0 0 0
0 0 0
For 2960-S switch output unassigned spaces do not apply.
Definitions of Fields in TCAM Checker Output
Description
The number of invalid values found in the TCAM tables.
The number of invalid masks found in the TCAM tables.
The number of initial attempts to fix the invalid values or masks.
The number of attempts to fix the invalid values or masks.
The number of failed attempts to fix the invalid values or masks.
"Troubleshooting CPU Utilization" section on page 39-28
"Troubleshooting Power over Ethernet (PoE)" section on page 39-29
"Troubleshooting Switch Stacks" section on page 39-33
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Purpose
Displays TCAM memory consistency check errors in the HQATM
HFTM, and unassigned spaces on the TCAM.
0 0
0 0
0 0
Troubleshooting Tables
39-27