Manageability Features - Cisco Catalyst 2960 Software Configuration Manual

Features
•
•

Manageability Features

•
•
•
•
•
•
•
•
•
•
•
•
•
Note
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
1-6
station or PC. You can manage the switch stack by connecting to the console port or Ethernet
management port of any stack member. For more information about the CLI, see
the Command-Line Interface."
SNMP—SNMP management applications such as CiscoWorks2000 LAN Management Suite (LMS)
and HP OpenView. You can manage from an SNMP-compatible management station that is running
platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive set of
MIB extensions and four remote monitoring (RMON) groups. For more information about using
SNMP, see Chapter 30, "Configuring SNMP."
Cisco IOS Configuration Engine (previously known to as the Cisco IOS CNS
agent)-—Configuration service automates the deployment and management of network devices and
services. You can automate initial configurations and configuration updates by generating
switch-specific configuration changes, sending them to the switch, executing the configuration
change, and logging the results.
For more information about CNS, see
CNS embedded agents for automating switch management, configuration storage, and delivery
DHCP for automating configuration of switch information (such as IP address, default gateway,
hostname, and Domain Name System [DNS] and TFTP server names)
DHCP relay for forwarding User Datagram Protocol (UDP) broadcasts, including IP address
requests, from DHCP clients
DHCP server for automatic assignment of IP addresses and other DHCP options to IP hosts
DHCP-based autoconfiguration and image update to download a specified configuration a new
image to a large number of switches
DHCP server port-based address allocation for the preassignment of an IP address to a switch port
Directed unicast requests to a DNS server for identifying a switch through its IP address and its
corresponding hostname and to a TFTP server for administering software upgrades from a TFTP
server
Address Resolution Protocol (ARP) for identifying a switch through its IP address and its
corresponding MAC address
Unicast MAC address filtering to drop packets with specific source or destination MAC addresses
Configurable MAC address scaling that allows disabling MAC address learning on a VLAN to limit
the size of the MAC address table
Cisco Discovery Protocol (CDP) Versions 1 and 2 for network topology discovery and mapping
between the switch and other Cisco devices on the network
Link Layer Discovery Protocol (LLDP) and LLDP Media Endpoint Discovery (LLDP-MED) for
interoperability with third-party IP phones
LLDP media extensions (LLDP-MED) location TLV that provides location information from the
switch to the endpoint device
To use LLDP-MED, the switch must be running the LAN Base image.
Chapter 4, "Configuring Cisco IOS Configuration Engine."
Chapter 1 Overview
Chapter 2, "Using
OL-26520-01