Heatilator CRAVE4836-B Installation And Appliance Setup page 65

EFFECTIVE LENGTH
32 IN. (813 mm) MIN.
35 IN. (889 mm) MAX.
PVI-SLP-B
Power Vent Inline
Note: SLP-LPC, SL-2DVP and
DVP-2SL components must be
accompanied by a PVI-SLP-B.
6-11/16 in.
(169 mm)
3-15/16 in.
(101 mm)
8 in.
(203 mm)
Figure 12.5 Vent Components
Heatilator • CRAVE4836/ST-B, CRAVE6048/ST-B, CRAVE7260/ST-B, CRAVE8472/ST-B Installation Manual • 2301-973 Rev. H • 5/17
13-5/8 IN.
346 mm
20-3/4 IN.
527 mm
13-5/8 IN.
(346 mm)
12-1/2 IN.
(318 mm)
(Approved for use with PVI-SLP-B only)
3-13/16 in.
(97 mm)
SL-2DVP
Adapter
12 IN.
305 mm
DESCRIPTION
10 ft. PV Wire Harness
20 ft. PV Wire Harness
40 ft. PV Wire Harness
60 ft. PV Wire Harness
12-1/2 IN.
318 mm
80 ft. PV Wire Harness
100 ft. PV Wire Harness
Note: Wire harnesses required to power the PVI-SLP-B connect
to the appliance and are ordered separately from PVI-SLP-B.
Contact your dealer to order.
Note: The PVI-SLP-B requires a PV-IPI-CK be installed on this
appliance. The PV-IPI-CK is ordered separately from the PVI-
SLP-B. Contact your dealer to order.
16 IN.
406 mm
4-1/2 IN.
114 mm
9-3/16 IN.
(233 mm)
16-11/16 IN.
424 mm
SLP-LPC
SLP Low Profile Cap
3-15/16 in.
(101 mm)
4 in.
102 mm
5-1/16 in.
(128 mm)
7-3/8 IN.
187 mm
14 IN.
356 mm
SLP-TB1
Basement Vent Cap
Optional Wire Harness
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
15 IN.
(381 mm)
16-11/16 IN.
(424 mm)
6-3/8 in.
163 mm
4-5/8 in.
117 mm
8-1/8 in.
206 mm
DVP-2SL
Adapter
17-7/8 IN.
454 mm
4-3/16 in.
106 mm
5-1/16 in.
128 mm
65