Heatilator CRAVE4836-B Installation And Appliance Setup page 55

TRIM RING INSTALLED
FINISH TO THIS EDGE OF TRIM RING
Figure 10.7 Non-Combustible Finish Material Diagram for 1-4
Inch Thick Inside Fit Method Using Trim Ring
(Option #2)
Heatilator • CRAVE4836/ST-B, CRAVE6048/ST-B, CRAVE7260/ST-B, CRAVE8472/ST-B Installation Manual • 2301-973 Rev. H • 5/17
FINISH TO THIS EDGE
Finishing - Raised Hearth in Front of Appliance
A non-combustible hearth may be installed in front of the
appliance only if the inside fit finishing method with CFT
doors is used.
1. Non-combustible hearth material may be placed up to
the bottom edge of the trim ring. The hearth may be a
maximum of twelve inches in depth.
CFT FRONTS ONLY
TRIM RING
Figure 10.8 Finishing and Facing Materials - Inside Fit
CFT Decorative Front Only
CFT FRONTS ONLY
NON-COMBUSTIBLE HEARTH
12 IN. MAX
55