Configuring Classification Codes; Specifying The Classification Code For A Print Job - Ricoh Aficio MP C2050 Operating Instructions Manual

2. Setting Up the Printer Driver

Configuring Classification Codes

Use Web Image Monitor to specify whether or not to apply classification code requirement to print jobs.
• The configuration page can be printed at any time.
2
• The default setting for classification code requirement is "Optional".
1. Start Web Image Monitor.
2. Click [Login].
A dialog box for entering the login user name and login password appears.
3. Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network administrator.
4. Click [Configuration] in the left area, and then click [Logs].
5. Check that [Required] or [Optional] is selected for [Classification Code] in the [Common
Settings for All Logs] column.
If "Required" is selected for the classification code requirement setting in Web Image Monitor, any
print job that without a classification code specified will not be printed.
6. Click [OK].
7. Click [Logout].
8. Quit Web Image Monitor.

Specifying the Classification Code for a Print Job

When printing in an environment where classification codes are required, a classification code must be
specified for each print job.
• The PostScript 3 printer driver does not support the classification codes and it cannot be used to print
under environment which the classification codes are required.
For the RPCS printer driver:
1. Open the printer properties dialog box after creating a document in an application.
2. Click the [Print Settings] or [Setup] tab.
3. Select Job type in [Job type:] box.
4. Click [Details...].
If you select [Send to Job Binding] in the [Job type:] box, you cannot enter a classification code.
74