Replacing A Fan Tray - HP FlexFabric 12500E Installation Manual

Figure 56 Installing a card

Replacing a fan tray

CAUTION:
To avoid injury, do not touch any wires, terminals, and parts with a high-voltage hazard sign.
•
Fan trays are hot-swappable. To replace a fan tray when the switch is operating, pull out the fan tray
•
after it stops rotating. Keep your hands away from the spinning fan blades when removing the fan tray.
To ensure normal operation of the switch, do not keep the switch working without a fan tray for a long
•
time.
When removing a fan tray, hold the bottom of the fan tray to pull it out thoroughly.
•
Preparing for the replacement
1. Put on an ESD wrist strap, and make sure the wrist strap makes good skin contact and is correctly
grounded.
2. Unpack the fan tray to be installed.
Replacement procedure
To replace a fan tray:
1. Loosen the captive screws on the fan tray.
76