Replacing A Power Monitoring Module - HP FlexFabric 12500E Installation Manual

1. Rotate the power frame panel out with both hands to open the panel.
2. Gently pull the clip at the bottom left corner of the power module to the left to open the power
module cover.
3. Supporting the bottom of the power module with your left hand and holding the power module
cover with your right hand, gently pull the power module out of the power frame.
Figure 51 Removing a power module
1
4. Pull the clip at the bottom left corner of the new power module to the left to open the power module
cover.
5. Slowly insert the power module into the power frame slot until it fits in completely.
6. Close the power module cover and press the clip at the bottom left corner of the power module.
7. Push in the power module cover and close the power frame panel.
Figure 52 Installing a power module

Replacing a power monitoring module

To replace the power monitoring module:
1. Remove the power monitoring module.
2
3
4
73