Furuno CI-88 Installation Manual page 43

TEMP UNIT
Choose unit of temperature measurement from °C or °F.
PULSE UNIT
Choose unit of distance measurement from nm or km.
CUR FLOW DIR
Choose how to display tide data. FROM shows the direction from which the current is
flowing. TO shows the direction the current is heading.
BEAM TEST
Choose the beam to test among beam 1, beam 1-2, beam 1-3 and beam 2-3. Press ◄ or ►
to choose the beam to test. "NOW TESTING BEAM XX*" (* XX = beam number being
tested) appears when a beam is being tested.
LANGUAGE
Choose the interface language.
Type A: JAPANESE, ENGLISH, 中文, INDONESIA
Type B: JAPANESE, ENGLISH, VIETNAM,
SIMULATION
Turn the simulation mode on or off and choose simulation mode parameters.
VARIABLE: Feeds simulation mode data from the processor to the control unit.
FIXED: Use the user-set speed and tide values.
Procedure
1. Choose VARIABLE or FIXED and then the message "Press any function key to
execute." appears. Press any function key to start the simulation mode.
2. If you selected FIXED, the menu and message disappear and then the screen below
appears. Enter desired ship's speed and course and tide speed and direction for three
layers. Press the [MENU] key to close the menu. The message "LOADING
SIMULATION DATA" appears.
Note: To turn off the simulation mode, set SIMULATION to OFF.
RESET SETTINGS
Restore all (except LANGUAGE) default menu settings. Press any function key to reset
settings. Three beeps sounds when all settings have been reset.
Tide
Vector
1
2
3
TO
Current flow direction
ျမန္ မ ာ
1
2
3
FROM
4. ADJUSTMENT
4-9