Furuno CI-88 Installation Manual page 14

2. MOUNTING
Using the FP66-00601
1. Fasten the bracket to the control unit, using two pan head screws (M4x10).
2. Fasten the bracket to the mounting location with four 4x16 tapping screws.
Using the FP06-01120
1. Fasten the mounting plate to the mounting location with two 5x20 tapping screws.
2. Fix the bracket to the control unit with two hex. screws (M4x12).
3. Insert screwdriver from the top of the mounting plate holes and then loosely fasten two
hex. screws (M4x12).
Cable entrance hole
Tapping screws (5X20)
Bracket
Cable can be passed this direction.
4. Attach the control unit to the mounting plate and then tightly fasten two hex. screws.
5. Attach two hole plugs to the holes at the top of the mounting plate.
2-4
: Pan head screws
Bracket
Mounting plate
: Fix with hex. screws.
Mounting the control unit
Fasten the screws
Cable
to fix the bracket.
Set to the hex. screws
tightened at step 3.
Bracket