1. INSTALATION OVERVIEW
Location of earth terminal on each unit and grounding method
Ground the equipment.
Ungrounded equipment can give off or receive
electromagnetic interference or cause electrical shock.
Monitor unit/Control unit
Transceiver unit
Junction box
Ignore the protection grounding label at the fixing location for the copper strap.
1-4
CAUTION
Fix the ground wires
by the two wing nuts
at the rear of the units.
Fix copper strap (w=50 mm)
to ground studs by the two
wing nuts.
Fix copper strap to ground
studs by the two wing nuts.
Location of ground terminals