Furuno CI-88 Installation Manual page 13

5. Fasten the hanger (or monitor unit) to the mounting base with two upset screws. (Use
the upper holes to tilt the monitor unit 20º; lower holes to tilt it 9º.)
Upset screw
Mounting the control unit separately
To mount the control unit separately or without the monitor unit, one of the following
accessories (option) is required.
Type: FP06-01120
Name
Mounting plate 06-021-2111
Bracket 06-021-2112
Tapping screw 5x20
Hex. screw M4x12
Hole plug DP-687
Type: FP66-00601
Name
Bracket 66-030-3021
Tapping screw 4x16
Pan head screw M4x10
Bracket
Fastening hanger to mounting base
Code No.: 006-556-260
Type Code No.
100-279-740
100-281-880
000-802-081
000-882-040
000-808-417
Code No.: 006-916-680
Type Code No.
100-307-800
000-802-080
000-881-964
Use these holes to tilt
monitor unit 20 .
Mounting base
Use these holes to tilt
monitor unit 9 .
Qty
1
1
2
4
2
Qty
1
4
2
2. MOUNTING
Remarks
Remarks
2-3