Furuno CI-88 Installation Manual page 12

2. MOUNTING
2. Do one of the following:
● Mounting the monitor unit together with the control unit
a) Fasten the hanger at the rear of the monitor unit with four binding screws (M4x10).
● Mounting the monitor unit separately from the control unit
a) Dismount the coupling plate from the rear of the monitor unit to separate the monitor unit
from control unit.
b) Attach the hanger at the rear of the monitor unit with four binding screws (M4x10).
3. Grease threads of upset screws (M6x16, 2 pcs.) used to fasten the hanger to the
mounting base.
4. Attach the waterproofing cap (MJ-A10C, supplied as the installation materials) to the
CONT port at the back of the monitor unit.
2-2
1 2
3
4
Hanger (landscape-type)
1
2
4
3
Monitor unit, rear view
Bracket (rear view)
1 2
3
4
Bracket (rear view)
1
2
4
3