14. Press ▲ to choose COURSE CALIB.
15. Press ◄ or ► to enter the value.
16. Press ▼ to choose CSE CALIB MODE, and then press ► to choose MANUAL.
COURSE CALIB input value is only effective when MANUAL is selected on the menu.
Lead run
SOUND VELOCITY
Choose YES to calibrate sound velocity.
EXTERNAL KP1,
Set distance between transducer of this current indicator and external KP transducer which
is connected to the current indicator as an interference source. The setting range is 0.0 –
25.5 (m).
Also, set the DIP switch as shown on page 4-14.
EXTERNAL KP2
Set distance between transducer of this current indicator and external KP transducer which
is connected to the current indicator as an interference source. The setting range is 0.0 –
25.5 (m).
Also, set the DIP switch as shown on page 4-14.
Start Point
Func. key
pressed
Calibrated to equalize
these tides
5 minutes
(half way)
Off the track by 5 to
10° not to get on
own wake
4. ADJUSTMENT
4-7