Memory Locations - Cobra CXT1095 FLT Owner's Manual

TRI
MEM Mode Functions
SCAN
H-M-L
WATCH
ESC
Operation
Voice Activated Transmit (VOX)
In VOX mode, your microTALK
transmitting when you speak. You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions triggered by background noise.
Mode/Power
VOX Icon
R
Vox
X
TRI
MEM
SCAN
H-M-L
WATCH
ESC
HI MED LO WX
TRI
MEM
SCAN H-M-L
WATCH
ESC
Channel Button
TW DCS Scan
CTCSS Mem
Mode/Power
BURP Power Saver
R
Vox
X
HI MED LO WX
VOX Sensitivity Level
TW DCS Scan
CTCSS Mem
TRI
MEM
SCAN H-M-L
WATCH BURP Power Saver
ESC
Channel Button
10
CXT1095_FLT_MANL.indd 10-11
radio can be used "hands-free," automatically
®
To turn VOX mode on or off:
1. Press the Mode/Power button until the VOX icon
flashes on the display. The current On or Off
setting is displayed.
2. Press the Channel Up or Channel Down
button to turn VOX On or Off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
To set VOX sensitivity:
1. Press the Mode/Power button until the VOX icon
flashes and the current sensitivity level is displayed.
The current VOX sensitivity level is displayed
with letters "L" and a Number 1 through 5,
with Number 5 being the most sensitive level
and Number 1 being the least sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Operation
Introduction

10 Memory Locations

•
Your microTALK radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually or
can be scanned.
MEM/ESC Button
TRI
MEM
WATCH
ESC
TRI
MEM
SCAN
H-M-L
WATCH
ESC
Channel Button
MEM/ESC Button
TRI
MEM
WATCH
ESC
TRI
MEM
SCAN
H-M-L
WATCH
ESC
Channel Button
R
Vox
X
HI MED LO WX
TW DCS Scan
Memory Channel
CTCSS Mem
TRI
MEM
SCAN
H-M-L
WATCH
ESC
BURP Power Saver
Channel Button
Customer Assistance Warranty
To program a memory location:
1. Press the MEM/ESC button. Memory icon and
the Memory Location show on the display.
SCAN
H-M-L
2. Press the Channel Up or Channel Down button
to select the memory location (0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the MEM/ESC button to enter a
new memory location or edit an already
programmed memory location.
SCAN
H-M-L
4. Press the Channel Up or Channel Down button
to select the memory location.
5. Press the MEM/ESC button. The channel
numbers will flash on the display.
6. Press the Channel Up or Channel Down button
to select a channel (1 through 22).
7. Press the MEM/ESC button. The CTCSS icon
and privacy code numbers will flash on the
display.
8. Choose one of the following:
a. Press the Channel Up or Channel Down
button to select a CTCSS privacy code (01
through 38) for the channel.
b. Press the MEM/ESC button to switch from
CTCSS to DCS. The DCS icon and privacy code
numbers will flash on the display. The Channel
Up or Channel Down button can then be used
to select a DCS privacy code (01 through 83)
for the channel.
Nothing Comes Close to a Cobra
•
11
®
12/20/13 2:40 PM