Cobra CXT1095 FLT Owner's Manual page 11

Mode Functions
Operation
Privacy Code Scan
Your microTALK radio can automatically scan the Privacy Codes (either
CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only
one set of privacy codes (CTCSS or DCS) can be scanned at a time.
Scan Button To scan privacy codes:
1. While in Standby mode, press and release the
TRI
MEM
SCAN
Scan button twice (CTCSS) or three times (DCS)
H-M-L
WATCH
ESC
until the CTCSS or DCS icon and numbers are
TRI
MEM
SCAN H-M-L
WATCH
ESC
flashing.
Channel Button
2. Press and hold the Scan button to begin scanning
privacy codes within the selected channel.
R
Vox
X
Select Channel
HI MED LO WX
R TW DCS Scan
Vox
X CTCSS Mem
HI MED LO WX
TW DCS Scan
BURP Power Saver
Scan Privacy Codes
CTCSS Mem
BURP Power Saver
The Scan icon will continue to be displayed when privacy code scan
is on. Your radio will continue to scan privacy codes and stop as an
incoming transmission is detected. Your radio will remain on that
channel/privacy code for 10 seconds.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press Talk or Call/Lock button to enter the new setting and return
to Standby mode.
c. Do not press any buttons for 15 seconds to enter the new setting and
return to Standby mode.
16
CXT1095_FLT_MANL.indd 16-17
TRI
MEM
SCAN
H-M-L
WATCH
ESC
Operation
Introduction
NOAA* All Hazards Radio Channels
•
You can use your microTALK radio to listen to NOAA All Hazards Radio
channels transmitting in your area.
Weather Button
Hazards Radio Icon
MEM TRI
SCAN
H-M-L
WATCH
ESC
Channel Button
Weather (WX) Alert Mode
TRI
MEM
SCAN
Turning On the Weather Alert function will allow your radio to automatically
H-M-L
WATCH
ESC
receive NOAA weather signals and warnings from designated weather
broadcast stations. If the radio is turned ON, it will alert to Weather and other
emergency alerts broadcast by NOAA.
This feature is set
to OFF by default.
Weather Button
TRI
MEM
SCAN
H-M-L
ESC WATCH
Channel Button
Customer Assistance Warranty
To listen to All Hazards Radio channels:
1. Press the Weather button until the All Hazards
Radio icon and the currently selected All Hazards
Radio channel are displayed.
2. Use the Channel Up or Channel Down
button to change All Hazards Radio channels.
3. The All Hazards Radio icon will continue to
be displayed when All Hazards Radio is on.
4. To exit All Hazards Radio, press and hold the
Weather button until On or Off is displayed.
*National Oceanographic and Atmospheric Administration
Make sure the strongest
Weather channel is selected
for your area using the channel
selection in the previous menu.
To turn Weather Alert On or Off:
1. Press the Weather/Lock button until the Weather
Alert icon flashes on the display. The current On
or Off setting is displayed.
2. Press the Channel Up and Channel Down button
to turn Weather Alert On or Off.
3. Press and hold the Weather/Lock button again to
save the new setting and exit the Weather Alert
Mode and return to Standby mode.
Nothing Comes Close to a Cobra
•
•
17
®
12/20/13 2:41 PM