Memory Locations - Cobra MicroTALK PR561 BLT Owner's Manual

All manuals and user guides at all-guides.com

10 Memory Locations

Your microTALK radio has 10 Memory Locations for storing
®
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually or
can be scanned. (See page 18 for memory location scan.)
To program a memory location:
MEM/ESC Button
1. Press and hold the MEM/ESC button until
2. Press the Channel Up or Channel Down button
Channel Button
3. Press the MEM/ESC button to enter a
MEM/ESC Button
4. The channel numbers will flash on the display.
5. Press the Channel Up or Channel Down button
Channel Button
6. Press the MEM/ESC button. The CTCSS icon
Memory Channel
7. Choose one of the following:
Channel Button
10
Memory icon and the Memory Location blink
on the display.
to select the memory location (0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
new memory location or edit an already
programmed memory location.
to select a channel (1 through 22).
and privacy code numbers will flash on the
display.
a. Press the Channel Up or Channel Down
button to select a CTCSS privacy code (00
through 38) for the channel.
b. Press the MEM/ESC button to switch from
CTCSS to DCS. The DCS icon and privacy code
numbers will flash on the display. The Channel
Up or Channel Down button can then be used
to select a DCS privacy code (00 through 83)
for the channel.
•