Memory Locations - Cobra microTALK LI7000WX Owner's Manual

Hide thumbs Also See for microTALK LI7000WX:

Table of Contents

Introduction

10 Memory Locations

Your microTALK

your most frequently used channels and channel/privacy code

combinations. These Memory Locations can be selected individually

or can be scanned. (See page 21 for memory location scan.)

Mode Button

Memory Icon

Channel Buttons

Lock/Enter Button

Operation

radio has 10 Memory Locations for storing

To program a memory location:

1. Press the Mode button until the

Memory icon and the memory location

flash on the display.

2. Press the Channel Up or Channel Down

button to select the memory location

(0 through 9).

If a location has been programmed

before, its associated channel/privacy

code will be shown on the display.

3. Press the Lock/Enter button to enter

a new memory location or edit an already

programmed memory location. The channel

numbers will flash on the display.

4. Press the Channel Up or Channel Down

button to select a channel (1 through 22).

5. Press the Lock/Enter button.

The CTCSS icon and privacy code

numbers will flash on the display.

Customer Assistance

Warranty

•

Table of Contents