Start/Stop Code - Toshiba B-EV4 Series Manual

In the case of bar codes other than JAN, EAN, and UPC
(Example) CODE39
(Example) UCC/EAN128

(10) Start/Stop Code

This parameter is valid only when the type of bar code is CODE39 and NW7.
Where the parameter is designated, the program will not check if the transmit print data
is with a start code and stop code.
When the parameter is omitted in the case of CODE39 and NW7, a start/stop code will
be attached. The code to be added is "*" in the case of CODE39, and "a" in the case of
NW7.
For details, refer to "Auto Attachment of Start/Stop Code" to be discussed later in this
specification.
(11) Increment/decrement
Printing is performed while the data is incremented or decremented every time a label is
issued. Where the data row exceeds the maximum number of digits (40), the data row
will not be drawn.
When CODE128 (without auto code selection) is used, the number of the start code
(code A, code B, and code C) digits is regarded as 2.
Initial value
INC/DEC
Zero suppression
1st label
2nd label
3rd label
4th label
5th label
0000 0000
+10 +10
Not
5
designated
0000 0000
0010 0010
0020 0020
0030 0030
0040 0040
- 87 -
0000 0000
+10 +10
3 0
000 0000
010 0010
020 0020
030 0030
040 0040
999999
+1
3
999999
000
001
002
003