Feed Command; Feeds The Paper; Type Of Sensor; No Sensor - Toshiba B-EV4 Series Manual

6.3.15 FEED COMMAND

Function

Feeds the paper.

Format [ESC] Tabcde [LF] [NUL]
Term a:
b:
c:
d:
e:
Explanation

(1) Type of sensor

Type of sensor

0: No sensor

1: Reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using normal labels)
4: Reflective sensor
Selects cut or non-cut
0: Non-cut
1: Cut
Feed mode
C: Batch mode (Cut and feed when "Cut" is selected for parameter b.)
D: Strip mode (with back feed)
E: Strip mode (Reserved for future)
F: Partial cut mode (Non back feed cut mode)
Feedspeed
1: 2 inches/sec (2 inches/sec for the 300 dpi model)
2: 2 inches/sec (2 inches/sec for the 300 dpi model)
3: 3 inches/sec (3 inches/sec for the 300 dpi model)
4: 4 inches/sec (4 inches/sec for the 300 dpi model)
5: 5 inches/sec (4 inches/sec for the 300 dpi model)
6: 5 inches/sec (4 inches/sec for the 300 dpi model)
7: 5 inches/sec (4 inches/sec for the 300 dpi model)
8: 5 inches/sec (4 inches/sec for the 300 dpi model)
9: 5 inches/sec (4 inches/sec for the 300 dpi model)
A: 5 inches/sec (4 inches/sec for the 300 dpi model)
B: 5 inches/sec. (4 inches/sec for the 300 dpi model)
With/without ribbon
Direct thermal models:
Set to 0. (If "1" or "2" is specified, a ribbon error results.)
Thermal transfer models:
0: Without ribbon
1: With ribbon
2: With ribbon
No sensor:
Media feed takes place according to the parameter designated by the Label
Size Set Command.
Note: When the "F: Partial cut mode" is designated for the feed mode, "No
sensor" should be selected. (The partial cutter is supposed to be used for
cutting continuous media, like receipt rolls.)
- 135 -
[ESC] T