Kärcher CV 66/2 Service Manual page 8

Disconnect the cables of the brush motor at the connectors
Tilt appliance back
Remove the cover with filter basket
Unscrew the screws on the hinge (increased force: The
screws are secured with screw adhesive
Disconnect the micro switch cable in the appliance from the
connections
Loosen the hose clamp on the suction hose, do not pull off
Pull the suction hose off the brush head
Remove the cover from the appliance and set aside
Remove the suction turbine and disconnect the connections
8
English
Disconnect the connector on the pressure switch
Do not remove the pressure switch
Unscrew the fastening screw at the top of the frame
Slide the wire harness into the appliance sot that it will not be
pinched when the hood is lifted
Lift the hood off evenly toward the top, agitate a little
If you are unable to lift off the appliance hood, pull the side
parts apart a little.
There is a support strut in the frame. If the hood gets stuck on
it, it must be removed.