MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE ___________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ YOUR DEALER Name: __________________________________________________________________________________________________ Address: _______________________________________________________________________________________________ Phone Number: __________________________________________________________________________________________ 86322070 CV 02/03/09...
TABLE OF CONTENTS Machine Data Log/Overview......2 GROUP PARTS LIST Table of Contents..........3 Power Head.............5-1 HOW TO USE THIS MANUAL Optional Attachments........5-1 Miscellaneous Spare Parts......5-1 How to use this Manual........1-1 Parts List ............5-2 Warranty ............5-7 SAFETY Machine Registration Card......5-9 Important Safety Instructions ......
HOW TO USE THIS MANUAL This manual contains the following sections: The SAFETY section contains important information regarding hazard or unsafe practices HOW TO USE THIS MANUAL of the machine. Levels of hazards is identified that SAFETY could result in product or personal injury, or severe OPERATIONS injury resulting in death.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. WARNING: To reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 2.
Important Safeguards Accidents due to misuse can only be prevented by those using the machine. To guard against injury, basic safety precautions should be observed, including the following: WARNIG: ELECTRIC SHOCK COULD OCCUR IF USED Read and follow all safety instructions. OUTDOORS OR ON WET SURFACES The vacuum cleaner is designed to be safe when used to perform cleaning functions.
GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a code having an equipment–grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
TECHNICAL SPECIFICATIONS VACUUM PORTION: (Carry unit) ITEM DIMENSION/CAPACITY Vacuum Motor High Performance, single stage Vacuum Motor Rated Power 1000 Watts Vacuum Motor Maximum Power 1200 Watts Suction 225 Mbar (2300 mm WS) Waterlift 92 in (234 cm) Air Flow 102 cfm (48 l/s) Filter Bag Capacity 3.5 litres, 3 layer, enclosed, top-loading Weight...
ASSEMBLY/OPERATION ASSEMBLY The hose handle can be removed from the side of the vacuum and can be used with or without attachments. Also Please read all instructions before CAUTION maintain a grasp on the machine when using this machine. using the hose as it could tip if the hose is pulled too far.
OPERATION Important instructions for POWER HEAD CAUTION use on the power head. The power head also has an adjustable brush The brush roller is off and stopped when the height and to-the-edge brush action for effective machine is in the upright position and the handle is all around cleaning.
Page 12
OPERATION INDICATOR LIGHTS The electronic brush control constantly monitors the status of the brush, communicating the status through the lights on top. Green and Red: The brush is not fully engaged in the carpet. The height adjustment should be lowered. If the height adjustment is at the lowest setting, the brush is worn and needs to be replaced.
MAINTENANCE BRUSH ROLLER CHANGING FILTERS To remove the brush roller, press the button and Motor Protection Filter turn the bearing downward. NOTE: This filter can only be accessed by removing the filter bag. Turn the brush slightly to the right and pull it out. 1.
MAINTENANCE REMOVING BLOCKAGES If your bag full indicator light remains lit after you have changed bags and/or filters this is an indication that there may be a blockage somewhere in your unit. It is important to keep all areas of the system free from blockage, as this may damage your unit or its components.
PARTS POWER HEAD Description Notes POWER HEAD 12” CV300 Only POWER HEAD 15” CV380 Only OPTIONAL ATTACHMENTS Part No. Prv. No. Description Notes 86322440 1081DG CLIPS, ATTACHMENT DK GRY 86322450 1092DG CREVICE TOOL, DK GRY 86146290 1491DG UPHOLSTERY NOZZLE, DK GRY 86138400 1094DG DUSTING BRUSH, DK GRAY...