Safety Instructions; Hazard Levels; Technical Features; Operation And Control - Kärcher CV 66/2 Service Manual

1 Preface
Good servicing requires detailed and practice-oriented training
as well as good well-structured training materials.
Hence we offer regular basic and advanced training programmes
covering the entire product range for all service engineers.
In addition to this, we also prepare service manuals for important
appliances - these can be initially used as instruction guides and
later on as reference guides.
Apart from this, we also regular information about product en-
hancements and their servicing.
If you should require supplements, have corrections or questions
regarding this document, please address these citing the follow-
ing subject to:
international-service@de.kaercher.com
Subject:
The responsible product specialist will take care of your issue.
Copying and duplication of texts and diagrams as well as
third-party access to this information is permitted only with
the explicit permission of the company:
Alfred Kärcher GmbH & Co. KG
P O Box 160
D - 71349 Winnenden
www.kaercher.com
Case 107171
2

Safety instructions

2.1

Hazard levels

Danger
Immediate danger that can cause severe injury or even death.
3

Technical Features

The appliance is only to be used for dry cleaning of floors.
3.1

Operation and control

The appliance can be used in a forward motion by pushing it on
the push handle.
3.2

Vacuuming

The brush roller brushes dirt out of the floor covering. The suction
turbine produces a vacuum pressure, which pulls the dirt from the
brush head into the filter bag.
Due to the one-sided arrangement of the brushes, the right side
of the appliance can clean all the way to the edge.
Note:
If the display for a full filter bag is illuminated, switch the appli-
ance off and replace the filter bag.
3.3

Electrical system

The switches for the operation of the appliance are located in the
push handle.
– Mains connection 220 - 240V / 50 - 60Hz / 16A.
3
English