Replacing The Fuses - Yamaha XVS650H 2016 Owner's Manual

turned to "OFF", then discon-
nect the negative lead before
disconnecting the positive lead.
[ECA16303]
2. If the battery will be stored for
more than two months, check it at
least once a month and fully char-
ge it if necessary.
3. Fully charge the battery before
installation. NOTICE: When in-
stalling the battery, be sure the
key is turned to "OFF", then
connect the positive lead before
connecting the negative lead.
[ECA16841]
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals.
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.
Periodic maintenance and adjustment

Replacing the fuses

1. Fuse box
2. Main fuse
3. Spare main fuse
The main fuse and the fuse box, which
contains the fuses for the individual cir-
cuits, are located behind panel B. (See
page 7-8.)
ECA16531
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
7-31
avoid causing extensive dam-
EAU2352A
age to the electrical system and
possibly a fire.
1. Headlight fuse
2. Signaling system fuse
3. Ignition fuse
4. Carburetor warmer fuse
5. Parking lighting fuse (XVS650AH)
6. Backup fuse (for immobilizer system)
(XVS650AH)
7. Spare fuse
[EWA15132]
7