To install the passenger seat
1. Insert the projections on the front
of the passenger seat into the seat
holders as shown and place the
seat in the original position.
1. Seat holder
2. Projection
2. Install the washer and nut, and
then tighten the nut to the speci-
fied torque.
Tightening torque:
Passenger seat nut:
13 N·m (1.3 kgf·m, 9.4 lb·ft)
Rider seat (XVS650AH)
To remove the rider seat
1. Remove the passenger seat.
Instrument and control functions
2. Remove the bolt, and then pull the
rider seat up.
1. Bolt
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, place the seat in the
original position, and then install
the bolt.
4-14
1. Seat holder
2. Projection
2. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
4