Periodic maintenance and adjustment
TIP
Skip steps 4–7 if the oil filter element is
not being replaced.
4. Remove the outer and inner oil fil-
ter element covers by removing
the bolts.
7
1. Outer oil filter element cover
2. Bolt
1. Inner oil filter element cover
2. Bolt
5. Remove the oil filter element and
O-ring.
1. Oil filter element
2. O-ring
6. Install a new oil filter element and
O-ring.
7-12
TIP
Make sure that the O-ring is properly
seated.
7. Install the oil filter element covers
by installing the bolts, and then
tighten them to the specified
torque.
Tightening torque:
Oil filter element cover bolt:
10 N·m (1.0 kgf·m, 7.2 lb·ft)
8. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 N·m (4.3 kgf·m, 31 lb·ft)
9. Refill with the specified amount of
the recommended oil, and then in-
stall and tighten the oil filler cap.