Chapter 12 Line Card Management; Line Card Management Commands Summary; Command Examples - ZyXEL Communications IES4005M User Manual

Use these commands to enable, disable, reset, or display status information about line cards.

12.1 Line Card Management Commands Summary

This table describes the commands.
Table 74 Line Card Management Commands Summary
COMMAND
lcman slot <slot> provision-
type <card type>
lcman disable <slot>
lcman enable <slot>
lcman reset slot <slot>
show lcman

12.1.1 Command Examples

This example shows how to check all card states and activate a card before you can use it:
Display all line cards' status. The result shows three cards are installed (the MSC1002G, one ADSL
1
card, and one VoIP card.
Activate (provision) slot 2 where the ADSL card is installed.
2
Note: You can only use a slot after you provision it. Here "use" means to use interface
related commands such as interface, show interface, clear interface
commands. After you provision the slot for a type of line card, you can only use
that type of line card in the slot. Provisioning a slot with a wrong provision type
cannot activate the slot.
IES4005M User's Guide
C
HAPTER
Line Card Management
DESCRIPTION
Configures the line card type of the specified slot. You must do this to
be able to use a line card in the slot. You can only use a slot after you
provision it. After you provision the slot for a type of line card, you can
only use that type of line card in the slot.
slot: slot number 2 ~ 5
card type: card type alc (ADSL2+), vlc (VDSL2), or vop (VoIP)
Disables the line card in the specified slot.
Enables the line card in the specified slot.
Resets the line card in the specified slot.
Displays the status of the installed line cards. Optionally, displays the
information of specified installed line card.
1 2
M P
C 13
E 13
E 13
E 13
E 13
107