ZyXEL Communications IES4005M User Manual page 100

Chapter 11 Management
Table 69 aaa command summary (continued)
Command
aaa accounting update period
<period>
aaa accounting system <method>
aaa accounting exec <start-
stop|stop-only> <method>
aaa accounting command privilege
<privilege> stop-only tacacs+
show aaa accounting
no aaa accounting update period
no aaa accounting system
no aaa accounting exec
no aaa accounting command
no aaa accounting
100
Description
Sets how often the IES sends an update to the accounting server. This
is only valid if you set the start-stop option using the aaa
accounting exec command.
period: 1 ~ 2147483647 in minutes, default is 1 minute
Sets the accounting method used for recording the following system
events: system boots up, system shuts down, system accounting is
enabled, system accounting is disabled.
method: radius or tacacs+
Sets the mode and accounting method used for recording
administrator's login and logout events via the console port, Telnet or
SSH.
start-stop: to have the system send information to the accounting
server when a user begins a session, during a user's session (if it lasts
past the "update period"), and when a user ends a session.
stop-only: to have the system send information to the accounting
server only when a user ends a session.
method: radius or tacacs+
Sets the accounting method used for recording information when
commands of the specified privilege level and higher are executed on
the system.
privilege: 1-14
Note: TACACS+ is the only method for recording the "commands" type
of events.
Displays accounting settings.
Resets the update interval for accounting to the default value.
Disables accounting for system type events, such as system boots up
and system shuts down.
Disables accounting for exec type events, such as recording
administrator's login and logout events via the console port, Telnet or
SSH.
Disables accounting for command type events.
Resets all accounting settings to their defaults.
M P
C 13
C 13
C 13
C 13
E 3
C 13
C 13
C 13
C 13
C 13
IES4005M User's Guide