Using As A Network Printer - Ricoh SP C250DN Operating Instructions Manual

5. Click [The printer that I want isn't listed].
6. In the [Select a shared printer by name] box, enter "http://(machine's IP address or host
name)/printer (or ipp)" as the printer's address, and then click [Next].
7. Click [Have Disk...].
8. Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click [Close].
9. Click [Browse...], and then specify a location for the INF file.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• PCL 5c
32-bit driver D:\DRIVERS\PCL5C\XP_VISTA\(Language)\DISK1
64-bit driver D:\DRIVERS\PCL5C\X64\(Language)\DISK1
• PCL 6
32-bit driver D:\DRIVERS\PCL6\XP_VISTA\(Language)\DISK1
64-bit driver D:\DRIVERS\PCL6\X64\(Language)\DISK1
• PostScript 3
32-bit driver D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1
64-bit driver D:\DRIVERS\PS\X64\(Language)\DISK1
For details about the languages supported in the printer drivers, see page 6 "Supported
languages".
10. Click [Open].
11. Click [OK] to close the [Install From Disk] window.
12. Select the manufacturer and model name of the machine you want to use, and then click
[Next].
The installation starts.
13. Follow the instructions that appear. Modify settings such as printer name and default
printer configuration, as necessary. You can also print a test page.
14. Click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.

Using as a Network Printer

Describes the driver installation procedure for each print server. See the installation procedure for the
print server you are using.
• When using NetWare, an optional NetWare unit is required.
Installing the Printer Driver for a Network Connection
13