Write Add Media Information - Brother P-touch QL-710W Service Manual

1.7

Write add media information

Media information not in the machine is written into the machine by default.
(1) Writing media information starts automatically when the previous inspection is
completed.
* When operating the writing again after failing on the media writing once, check
that the "Write add media information" field is highlighted in yellow, then press
the [Run] button.
(2) The inspection is completed when the information is successfully written and the
message below appears in the "Results" field.
If the writing is failed, error message appears in the "Results" field and the
inspection ends up as NG.
* If you want to stop the writing after it's started, press the [Stop] button.
Fig. 24
1 - 18