Brother QL-800 Product Safety Manual
Dk label. dk tape
Hide thumbs
Also See for QL-800:
- User manual (83 pages) ,
- Quick setup manual (10 pages) ,
- Quick setup manual (10 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Related Manuals for Brother QL-800
Summary of Contents for Brother QL-800
- Page 1 Product Safety Guide QL-800/QL-810W/QL-820NWB Label Printer QL-800/QL-810W/QL-820NWB Read the whole guide before using your product and keep it for later reference. AUS-ENG...
-
Page 2: Important Notice
For more information, and for information about software and using the printer on a network, see the User’s Guide, which can be found on the Brother support website. The latest version of your printer documentation is available from the Brother support website at support.brother.com Save all documentation for later reference. - Page 3 To use your printer safely If your printer malfunctions, immediately stop using it, and then contact your Brother dealer. Symbols used in this document The following symbols are used throughout this document: Indicates an imminently hazardous situation which, if the product is...
-
Page 4: Important Safety Instructions
If foreign objects are dropped into your Battery Unit, immediately turn it off, disconnect the AC Adapter/ AC Power Cord from the electrical socket, and then contact Brother customer service or your local Brother dealer. If you continue to operate your Battery Unit, a fire, electrical shock, or damage may occur. - Page 5 Immediately turn your printer off, and then contact Brother customer service or your local Brother dealer for repairs. DO NOT place the product near chemicals or in a place where chemical spillage could occur.
- Page 6 DO NOT allow the AC Adapter, AC Power Cord, or cable to be squashed. If the AC Adapter/AC Power Cord is damaged, contact Brother customer service or your local Brother dealer. Keep the AC Adapter/AC Power Cord out of the reach of children, particularly infants, otherwise injury may occur.
- Page 7 WARNING Before performing maintenance on your printer, such as cleaning, disconnect the AC Adapter/ AC Power Cord from the electrical socket, otherwise an electrical shock may occur. If your printer is not used for a long period of time, disconnect the AC Adapter/AC Power Cord from your printer and the electrical socket for safety reasons.
-
Page 8: General Precautions
AC Adapter, car adapter or battery charger) before the printer is used. If you notice anything unusual about the Battery Unit during use, charging or storage, for example overheating or rust, DO NOT continue to use the Battery Unit. Contact Brother customer service. Power Cord ... -
Page 9: Compilation And Publication Notice
Compilation and Publication Notice Under the supervision of Brother Industries, Ltd., this guide has been compiled and published covering the latest product’s descriptions and specifications. The contents of this guide and the specifications of this product are subject to change without notice. - Page 10 For Australia Only: Support - For technical support of your Brother Product other than what you can resolve through the User's Guide, please visit our Web Site or Support Web Site (see below) to find an answer to FAQs/Troubleshooting, locating Drivers & Software.
- Page 11 D01845001...