Table of Contents
Advertisement
Problem
Solution
Printed barcodes or
• Change the tape. (Recommended: Black on white tape)
QR codes cannot be read.
• Enlarge the barcodes or QR codes in the application you are
using.
I do not know the firmware
Check the firmware information by pressing the following keys:
version of the Label
Printer.
When the label is printed,
• When you use the [Small Margin] setting, the Label Printer feeds
there is too much margin
approx. 23 mm of tape before each label. To save tape, use the
(space) on both sides of
[Chain] setting. After the last label prints, press
the text.
feed the tape, and then press the Tape Cutter Lever.
• The Label Printer feeds approx. 23 mm of tape before every new
label. When printing multiple labels, you can reduce the blank
space on the second and subsequent labels.
Select the [Chain] setting in the optional print settings. Then, print
your labels and leave the last label in the Label Printer until you
are ready to print a new label.
• After the last label prints, press
feed the tape, and then eject and cut the last label. Note that the
Label Printer will feed approx. 23 mm of tape before the next new
label when you use this method.
The font size cannot be
The font is already the maximum size for the width of the label.
increased.
Or, the label length has been set, so there is a limit on the font size
to prevent exceeding the set length.
When multiple labels are
When Chain Print is enabled, feed the tape to eject the last printed
printed, the last label is cut
label, and then press the Tape Cutter Lever to cut the label manually.
incorrectly.
I cannot update the
Restart the printer and then try to update the firmware again. Do not
printer's firmware using the
press any buttons during the firmware update.
P-touch Update Software,
Transfer Express, or Mac
Update Tool.
[Version Information]
/
and
simultaneously to
Contact Information
Visit www.brother.com for contact information on your local Brother office.
To order supplies and accessories:
www.brother.eu/supplies
and
to
Advertisement
Table of Contents
