Quick Setup; Method One: Via The Wps Button - TP-Link RE200 User Manual

Chapter 2
2. 1.

Quick Setup

Power on
Plug the extender into an electrical outlet
the LED is solid on.
Connect to the host network
There are three ways to connect to the host network: via the WPS button, via a web
browser or via the TP-Link Tether app. Using the WPS button is the easiest way to
extend your host network. We recommend you to use this way if your router has a WPS
button. The button might look like one of these:
2. 1. 1.

Method One: Via the WPS Button

1. Press the WPS button on your host router, and then press the
extender within 2 minutes.
Tips:
• Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to
Method Two: Via a Web
• For more information about using WPS button on your host router, please refer to the router
manufacturer's user guide.
2. Wait until the LED changes to solid on, which indicates that the WPS connection is
successful. If it doesn't, please refer to
3. If you are connecting the extender to a dual-band router but only the 2.4G or 5G LED
is on, repeat Step 1 and 2 to connect to the other band.
4. Enjoy! Connect to the extended network and enjoy the internet. Both extended
networks share the same SSIDs (network names) and passwords as those of your
host networks.
Tips: Since the performance of the extended networks will be affected by the distance between the
extender and the host router, we recommend that you relocate your extender by referring to
Your Extender.
next to your host
Browser.
Method Two: Via a Web
Set Up Internet Connection
router, and then wait until
| | .
WPS
Browser.
button on the
Position
6