Quick Setup; Method 1: Via The Wps Button - TP-Link TL-WA854RE User Manual

Chapter 2
2. 1.

Quick Setup

Power on
Plug the extender into an electrical outlet
the Power LED changes to solid on.
Note: For safety, we suggest that you plug the extender in upright directions as shown below.
Connect to the host network
There are three ways to connect to the host network: via the WPS button, via a web
browser, or via the Tether app. Using the WPS button is an easier way to extend your
host network. We recommend you to use this way if your router has a WPS button. The
button might look like one of these:
2. 1. 1.

Method 1: Via the WPS Button

1. Press the WPS button on your host router, and then press the
extender within 2 minutes.
Note:
For more information about using WPS button on your host router, please refer to the router's user
guide.
2. Wait until the RE LED changes from blinking to solid on, which indicates that the WPS
connection is successful.
3. Enjoy! Connect to the extended network and enjoy internet. The extended network
shares the same network name and password as your router.
next to your host
Wait until the Wireless
LED turns solid on.
| | .
WPS
Set Up Internet Connection
router, and then wait until
button on the
6