Led Explanation; Port And Button Description - TP-Link RE200 User Manual

Chapter 1
1. 2. 1.

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
2.4G/5G
(Wireless)
(Ethernet)
(Power)
(RE)
1. 2. 2.

Port and Button Description

Ports or Buttons
(WPS Button)
Reset (Hole)
Ethernet Port
Status
The extender is connected to the 2.4GHz/5GHz wireless
Green
network of your host router and is in a suitable location.
The extender is experiencing poor signal strength.
Solid red
Please try relocating it closer to your host router.
Off No wireless connection is established.
On The extender's wireless function is enabled.
Off The extender's wireless function is disabled.
On A powered-on device is connected to the Ethernet port.
Flashing The Ethernet port is sending or receiving data.
No powered-on device is connected to the Ethernet
Off
port.
On The extender is on.
Off The extender is off.
On WPS connection is established.
Flashing WPS connection is being established.
Off No active connection.
Press the WPS button on your host router, and immediately press
on the extender. The LED
indicating successful WPS connection.
Use a pin to press and hold the Reset button until all the LEDs flash
once to reset the extender.
Connect your Ethernet-only device to the Ethernet port of the extender
to join the Wi-Fi network.
Get to Know About Your Extender
Indication
Description
of the extender should change to solid on,
4