TP-Link RE200 User Manual page 17

Chapter 3
Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
Note: Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is
available on your extender, please refer to the instructions to set your 5GHz network.
¾ To extend another host network:
1. Go to Settings > Wireless
2. Enable Connect to 2.4GHz Network
networks.
3. Select the 2.4GHz host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
• Move the extender closer to your router, and click
• You can manually enter the SSID (network name) and password of the network you want to extend, and
click Save.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
5. Click Save.
¾ To enable or disable the extended network:
1. Go to Settings > Wireless
2. Extended networks are enabled by default. If you want to disable the wireless function
of a certain band, just clear the
of this band will be invalid.
> Connect to Network.
and click
Rescan
> Extended Network.
Enable checkbox. In this case, all the wireless settings
Customize Your Network
Wireless Scanner to find all available
in the top-right corner of the list.
Password
15