Table of Contents
Advertisement
Chapter 2
2. 1.
Quick Setup
Power on
Plug the extender into an electrical outlet
Power LED changes to solid blue.
Connect to the host network
There are two ways to connect to the host network: via the WPS button or via a web
browser. Using the WPS button is the easiest way to extend your host network. We
recommend you to use this way if your router has a WPS button. The button might look
like one of these:
2. 1. 1.
Method One: Via the WPS button
1. Press the WPS button on your host router, and then press the
extender within 2 minutes.
Tips:
•
Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to
Two: Via a Web
Browser.
•
For more information about using WPS button on your host router, please refer to the router manufacturer's
user guide.
2. Wait until the
that the WPS connection is successful. If it doesn't, please refer to
a Web
Browser.
3. If you are connecting the extender to a dual-band router but only 2.4GHz or 5GHz
LED is on, repeat Step 1 and 2 to connect to the other band.
4.
Enjoy!
Connect to the extended network and enjoy the Internet. Both extended
networks share the same SSIDs (network names) and passwords as those of your
host networks.
Tips:
Since the performance of the extended networks will be affected by the distance between extender and host
router, we recommend that you relocate your extender by referring to
|
|
.
WPS
WPS
RE LED changes from blinking to a solid status, which indicates
near your host
router, and then wait until the
Press
Position Your
Set Up Internet Connection
RE button on the
Method
Method Two: Via
Extender.
6
Advertisement
Table of Contents
