Table of Contents
Advertisement
Chapter 2
2. 1.
Quick Setup
Power on
Plug the extender into an electrical outlet
the Power LED changes to solid on.
Connect to the host network
There are two ways to connect to the host network: via the WPS button or via a web
browser. Using the WPS button is an easier way to extend your host network. We
recommend you to use this way if your router has a WPS button. The button might look
like one of these:
2. 1. 1.
Method One: Via the WPS Button
1. Press the WPS button on your host router, and then press the WPS button on the
extender within 2 minutes.
Tips:
•
Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to
Method Two: Via a Web
•
For more information about using WPS button on your host router, please refer to the router
manufacturer's user guide.
2. Wait until the WPS LED changes from blinking to solid on, which indicates that the
WPS connection is successful. If it doesn't, please refer to
Browser.
3.
Enjoy!
Connect to the extended network and enjoy internet. The extended network
may use the same SSID as that of the host network or add _EXT to the end of the host
SSID, but the password is shared.
Tips:
Since the performance of the extended network will be affected by the distance between the extender
and host router, we recommend that you relocate your extender by referring to
|
|
.
WPS
Browser.
Set Up Internet Connection
next to your host
router, and then wait until
Method Two: Via a Web
Position Your
Extender.
6
Advertisement
Table of Contents
